DX Air Conditioner Controllers

DX Alp AC Controller Structure

The units required for DX air control units are assembled based on the requirements specific to your project.

The structure of the Alp DX air conditioner controllers is manufactured using aluminum oxide sheets, and other similar elements. The cell panels are 42 mm thick and the outer wall is electrostatic coated powder and the inner wall is made of galvanized sheet.

The modern design of Alp DX air conditioner controllers is of high density rock wool with a thickness of 70 kg / cubic meter which makes it high performance and energy efficient, and also provides a dynamic and static balance, working silently, so this efficient system is an essential part of any centrally ventilated space. Electric motors operate with a modular power of 380V-50HZ. You can also use electrically stationary motors that are of high importance in conductive fans.

All double walls are attached to the M6 screws of structural aluminum. Maintenance and service covers are sealed with rigid hinges that do not have separations in a way that prevents air leakage as standard. The doors are rigid and double-walled designed in such a way as to prevent friction with the frame. The legs of the structure are located under the cells with a thickness of 2 mm of galvanized sheet and a height of 180 mm of painted length. There are transport openings located on the legs of the structure in the form of cranes or forklifts.

During production, the mechanisms of automation of switches to provide the required pressure for Alp DX air conditioning controllers are activated, in addition to NTC temperature sensors, freeze sensors and the like.  The motor connection cables are located in the junction box outside the cell. The automation equipment is collected and inspected in the panel on the machine and delivered after calibration and testing.

Cell binding elements are made of aluminum alloy. YumReinforced materials were used during the manufacture of cell bonding devices with the outside.

Light bulbs and glass viewing ports are available for expulsion, ventilation and filtration stone. Thanks to these accessories, the closets can be controlled provided that they are not disabled.

Advantages of using a DX battery:

The DX battery, via a compressor motor, charges or cools the air taken from the air passing through the evaporator to the coolant, or cools it in a reverse way.

The outdoor VRF unit connects to a direct cooling battery that adapts to the air pass unit. When you do this, the coolant evaporates directly at the source to which the heat is transferred, i.e. in the AHU.

In the case of transfer using conventional refrigerants such as a water chiller or hot water boiler, heat is first transferred to the water and then heat is transferred into the AHU by pipes and pumps.

Using a DX battery, AHU adapts the space without the need for conventional cooling kits using the heat pumping feature.

Alp DX air conditioning units use minimal power and operate with high efficiency. They are designed to reduce air leakage and heat bridges to the lowest degree.  Alp DX air conditioning units use a special shock absorption system to reduce the dynamic force caused by vibrations.

Alp DX air conditioning units are designed and selected on the basis of reduced operating costs and high efficiency.

In order to support these priorities, energy-saving fans, efficient heat recovery and serpentine commutators are used in our products, and a central internal structure is used that optimally balances airflow.

Our automation systems enable increased efficiency and energy savings to the highest levels.

Advantages of Alp DX air conditioning unit:

• Energy loss in conveyor pipes is very small.
• A system that provides a low operating cost which makes the costs associated with the system as a whole also low.
• A single solution for companies that includes all the required capabilities easily and quickly.
• The cost of heating and cooling is low.
• Advanced inverter technology provides variable capacity and powers fans with optimal control.
• Consumes as much energy as needed in the desired area.
• Quick response to partial loads.
• Save energy in adapting large areas by disconnecting cooling groups from boilers.
• To prevent problems during the operation of the system and ensure its safety, the readiness of the external heat pump system was ensured, and synchronization was ensured with the DX air conditioning system.
• Installation of the system and its commissioning in a short time.
• There is no risk of aqueous serpentine freezing in the return AHU system.
• Maintenance costs are very low compared to conventional systems.
• Low noise level.
• The risk of static load in the DX system is extremely low in metal pipes, pumps and the liquid inside them in the coolant and water-heated boiler.
• It does not need a closed interior space due to its compatibility with external conditions.
• Alp DX air conditioning controllers are produced with an air flow rate of 1800 and 25000 cubic meters per hour and cooling power of 14-224 kW.
• High efficiency in heat recovery by rotor or plate with purification property, which leads to energy savings.
• Alp DX air conditioning controllers have an insulated rock wool structure with a thickness of 42 mm and a panel of 50 kg / m³.
• All safety signals, warning signals and capability information labels are available in Alp DX units for air conditioning control.
• The fans are paired directly to the appropriate motor shaft for control by the frequency inverter. You can also use electrically stationary motors with fans.
• The power of the fan and motor was effectively selected after the filter was purified and the damaged pressure.
  MCC (Magnetic Control Center) and DDC (Direct Digital Control) panels are available with a protection class built into Alp HVAC controllers.
• With the exception of MCC and DDC boards, the emergency safety button is standard.
• A built-in switch is available that disconnects the device from the mains during an emergency.
• The Alp DX air conditioning unit with EEV (Electronic Extension Valve) and temperature sensors is installed in the device during the manufacturing process and is protected from weather conditions.
• On the topic of defrosting the VRF unit connected to DX air conditioning controllers, the air conditioning controller control system can be ready without alarm.
• Using DX batteries, evaporators capable of cooling in summer, and condensers capable of heating in winter, can be used.
• Alp DX air conditioning controllers include several standard attachments, such as observation glass, siphon, and additional accessories.
• Alp DX and VRF consoles are set up outside, as well as mechanical installation, cable end connections, final installation and commissioning by our company.
• Operating Basic training and service are provided by our company.
• Optionally, the frequency inverter can be used for the AC motor fan. The frequency converters that will be used to control the motor have high EMC filtration.
• Connecting fans can control the air flow rate by calculating the pressure difference with the internal inverter.
• The air flow rate is maintained through the DX battery by means of an inverter frequency controller.
• Optionally, the microprocessor controller on the DDC board can communicate with at least one communication protocol.
• Optionally, the microprocessor controller is programmed with software that is appropriate and compatible with the operating logic of DX systems. Precision and sensitive process automation systems are available in Alp DX air conditioning control systems such as quick take-off, defrosting time, defrost cycle and the like, and the system also provides notifications for each of them. In this way, safety measures can be taken immediately.
  The Alp DX air conditioning control system is equipped with many useful accessories that provide additional functions such as throttle motors, pressure difference sensors, temperature and humidity sensors, CO2 CO/VOC sensors, triode adapter, proportional valve actuators, antifreeze system and the like.